Our Clients a Fortune 500 MNC are Looking for candidates with Qualification and experience in Electrical Engineering, Electronics Engineering, Power Electronics, Consumer Electronics, Mechanical Engineering, Instrumentation engineers and software engineers, Test Engineers for their employment at Hyderabad. Complete details for theses positions are given to the various links on the Left. To apply for any of these positions please send an email with Resume attachment with the subject line of mail indicating the position applied for.

Firmware Engineer
Position 1 Testing Designing & Coding FPGA CPLD
COS # 398125
Responsibilities
Primary: to write test specifications. Responsible for internal test reports as well as reports from test-houses. Involved in trouble shooting systems. He/she is the 1st line receiver of LCS problems reported by Programma. He/she is responsible for re-creating possible faults and to write complete trouble reports. Write user documents
Secondary: Support development team with their documentation load. Coordinate documentation. BOM/ECO/design doc/reports etc
Hands on experience on FPGA, CPLD & in using Analog Devices DSP family.
EDA TOOLS- XILINX Foundation Series, Xilinx ISE , Synopsis FPGA -Express
2-4 years of experience in designing/coding for embedded applications preferably on Windows XP Embedded platform. Assembler & C experience.
System programming with function block (Knowledge on Lab View (N.I.))
Experience in designing with the PC bus ISA.
Qualification / Requirements:
Graduate/Post Graduate in ECE/EEE/instrumentation.
Domain expertise in Metering / instrumentation will be added advantage
Good communication/analytical skills
Experience in developing the test criterion and test set ups.
Responsibility : Design and development of test and metering equipment for substation equipments like Energy Meter, Circuit Breaker, Relays, Transformer. Take active participation in sustaining activity of the existing product line. Product support.

Email Resume   Top
Position 2 Firmware Engineer - Transformer
COS # 398127
Responsibilities
Primary: to implement enhance mathematical models that have been previously developed in the Transformer monitoring … Cooling Status, Winding Hot Spot, OLTC Tap position OLTC temperature differential( in conjunction with STR). Adress bridge for product specific (Hydran) protocol, adaptation of existing GUI, moisture bubbling models(Aging) , Apparent Power and Cooling Efficiency
Secondary: Testing & documentation. Maintaining eNPP project
Knowledge of the eCOS RTOS. Embedded C programming
Good knowledge on DNP3 communication protocol.
Basic knowledge on power transformers
Knowledge on NI - DAC cards and Lab view is added advantage
Qualification /Requirements:
Graduate/Post Graduate in ECE/EEE/instrumentation.
Domain expertise in Metering/instrumentation will be added advantage
Good communication/analytical skills
Experience in developing the test criterion and test set ups.
Email Resume   Top
Position 3 Firmware Engineer Micro controller
COS # 398128
Responsibilities
Primary: Design of meter's AMR requirements, metering algorithms, resolving field problems of existing product line. Study the microcontoller obsolescence and develop the new code.
Secondary: Testing & documentation.
Hands on experience on Micro controller (NEC, Hitachi, TDK families) and DSP applications.
2-4 years of experience in designing/coding for embedded applications
Experience in installation and debugging of development environment is must.
Qualification/Requirements:
Graduate/Post Graduate in ECE / EEE/ instrumentation.
Domain expertise in Metering/instrumentation will be added advantage
Good communication/analytical skills
Experience in developing the test criterion and test set ups.
Email Resume   Top
Electronics Engineers
Position 1:
Component Engineer
COS # 398129
Responsibilities
Primary: Study the existing products - identify the components getting obsolete, identify alternative components, make qualification plan and get approved.
Secondary: Mantaining and upgradation of manufacturing documentation.
Qual/Requirements:
Graduate/Post Graduate in ECE/EEE/instrumentation.
2-4 years of experience as a component engineer on analog and digital circuits
Domain expertise in instrumentation will be added advantage
Good analytical skill and good documentation experience.
Knowledge on NI's DAC is added advantage.
Responsibility : Design and development of test and metering equipment for substation equipments like Energy Meter, Circuit Breaker, Relays, Transformer. Take active participation in sustaining activity of the existing product line. Product support.
Email Resume   Top
Position 2:
Power Electronics Engineer
COS # 398131
Responsibilities
Primary: Design of power supply and reverse engineering of products, performing root cause analysis from high level problem description, redesign of non comply product, preparation of production & type test spec, Responsible for approval of PCB layouts of power converters and amplifiers
Secondary: Recreate product manufacturing and design documentation. Maintaining PCAD or ORCAD docs.
Qual/Requirements:
Min 3-4 years design experience of switching and linear power supplies
Switching power converters 1W - 15 kW
Experienced in magnetics design Transformer, Inductors 50 Hz -> 100 kHz
Must be able to design products meeting EN 61326
Must be able to design products meeting IEC 61010-1
Linear power supplies design 1W - 1000W
Thermal design natural convection and forced convection
Linear power amplifier design 1W - 1000 W
Responsibility : Design and development of test and metering equipment for substation equipments like Energy Meter, Circuit Breaker, Relays, Transformer. Take active participation in sustaining activity of the existing product line. Product support.

Email Resume   Top
Position 3&4:
Electronics Engineer Digital Electronics
COS # 398132
Primary: Design of AMR requirements for metering product, performing root cause analysis from high level problem description, preparation of produc & type test spec, Responsible for approval of PCB layouts. Coordination with suppliers and taking care of production quality requirements
Secondary: Recreate product manufacturing and design documentation. Maintaining PCAD or ORCAD docs.
Qualification /Requirements:
Graduate/Post Graduate in ECE/EEE/instrumentation.
Hands on experience on digital electronics, digital signal processing, power supply design.
2-4 years of experience in designing and analysis of circuits,
Domain expertise in Metering/instrumentation will be added advantage
Experience in developing the test criterion and test set ups, ICT and FCT.
Good communication/analytical skills
Should be capable of designing the PCBs
Responsibility : Design and development of test and metering equipment for substation equipments like Energy Meter, Circuit Breaker, Relays, Transformer. Take active participation in sustaining activity of the existing product line. Product support.
Email Resume    Top
Software Engineers Automation- Visual Basic 6.0
Cos # 398134
Responsibilities
Primary: Design and development of HMI software for Substation automation Solutions, Transformer Monitoring and Diagnostics software's. Take active participation in sustaining activity of the existing product line. Assist in Product support & new enhancement.
Qual/Requirements:
Graduate in ECE/EEE/instrumentation is preferred or MCA with First class
Hands on experience with HMI software , .
2-4 years of experience in designing/coding in Visual Basic 6.0 , SQL Server, COM/DCOM
Domain expertise in Transformer monitoring or sub station Automation products will be added advantage
Good communication/analytical skills
Experience in C++, VB.Net , C# is an added advantage
Microsoft Certified professional is an added advantage
Responsibility : Design and development of test and metering equipment for substation equipments like Energy Meter, Circuit Breaker, Relays, Transformer. Take active participation in sustaining activity of the existing product line. Product support.
Email Resume   Top
Product Engineer for Electronic Trip Systems
Title: Engineer Level: Professional Band -
Component: Electronics: Industrial
COS # 398109
Location: Hyderabad, India
Relocation Exp: Per company policy
Essential Functions (Responsibilities)
For supporting Electronic trip systems and electronic accessories for low voltage circuit breakers
The job involves:
Defining and executing quality improvement projects: Identifying root cause of issue. Analyzing design and manufacturing capability. Designing corrective actions. Implementation and tracking of results
Working on product development (quick turn around projects) and supporting new product introduction team
Analysis and qualification alternate components for the obsolete components
Handling of Plant quality / production issues and supporting contract manufacturers
Documentation ownership: Engineering Change Notices handling, maintaining product related files in the GE database etc.
Supporting Value Engineering team and Low Cost Region moves
Support the marketing team with product strategy and advanced development
Must have familiarity with:
PCB design tools - PCAD / CADSTAR
Saber / PSPICE
Assembly / C Programming
Six Sigma tools
Qualifications/ Requirements
B.Tech or equivalent in Electronics with 3+ years of hands on experience in mixed signal/embedded hardware
Excellent organizational, interpersonal, communication skills required.
Desired
Experience with circuit protection and motor control products; Exposure to manufacturing and testing setup.
Email Resume   Top
Quality Engineer Enclosed Products
COS # 393920
Positions : 1
Enclosed Products
Purpose:
· To drive quality related projects for Enclosed products like load centers, Meter socket load centers, safety switches, QMR and ADS switches….
· To support Product owner in daily activities.
Principal duties and responsibilities:
· Project execution involving dimensional tolerance analysis, kinematics analysis, Structural and electro-mechanical analysis.
· Project generation, which will result in reducing warranty and number of defects in products.
· To support manufacturing plants in correcting BOM, approving waivers, controlling internal quality defects.
· Maintain and own a deck of quality projects.
Accountabilities:
· Reduce warranty and number of defects, both Internal (manufacturing plant) and External (customers).
· On time project execution, timely support to plants.
· Completion of Change requests and change notices (long range)
Qualification required:
· BE/B Tech in Mechanical Engineering/Industrial production
· Part modeling, Assembly modeling, drawing creation using Pro Engineer
· Structural and Electro-mechanical analysis using Ansys
· Skills with software like AutoCad, RasterCad
· Minimum 4 year experience in CAD/CAM/CAE
· Manufacturing knowledge in any industry
Qualification desired:
· Tool Engineering background with knowledge of manufacturing processes (stamping, molding, casting, extrusion, rolling…) and assembly line operations.
· Experience related to switch gear, breakers, enclosures
· Kinematics analysis using Pro Mechanica or working model.
· Exposure to Six sigma methodologies.
Email Resume   Top
Application Engineer - Electrical
Job # 378738
Responsibilities:
Responsible for reviewing the Customer specification.
Complete the Electrical design as per customer specifications
Support plant in building motors.
Support Marketing/customer queries.
Keep track of process performance data, participate in idea generation activities
Qualifications :
2 - 4 years experience in low voltage induction motors design, manufacturing, testing or application.
Knowledge of manufacturing, testing & application of induction motors
Bachelor degree in Electrical Engineering.
Excellent team player.
Desired:
Good English verbal / writing skills.
Knowledge on 6 sigma .
Induction motors design for drives application.
Knowledge on standards like NEMA / IEC applicable for motors.
Knowledge of handling electrical cost out projects.
Working knowledge on mechanical design aspects like bearing selection/ life calculation, etc.
Email Resume  Top
Electrical Design Engineer
COS # 393976 / 393920
Location: Hyderabad, India
Relo Exp:
Job COS # 393676
Essential Functions (Responsibilities)
Responsible for Electrical design,development and technical support of several UL product lines for Industrial applications like MCCB, ACB, MCB, RCCB, GFCI, Isolators.
Responsible for generating conceptual designs.
Responsible for Electro-Mechanical design. He/She would be required to design Current path, Arc Runner & Arc Chamber with knowledge of Short circuit behavior.
Should able to develop Mathematical models of assembly system.
Provide technical guidance and ownership of legacy on Industrial/residential UL product lines.
Plan & execute the design & development of modified and new products
Provide technical guidance to remote design teams on new & legacy products
Plan & execute product quality improvement programs
Support Marketing, Manufacturing, Sourcing, Post-Sales Support & Quality in technical issues.
Usage of FEA tools like (Ansys / Magnets ,etc)
Knowledge of Pro-Engineer, Minitab,
Qualifications/ Requirements
Bachelor in Electrical Engineering or equivalent
3-8 years experience in Electrical design - Industrial/Residential Products design experience is an added advantage.
Familiar with ANSI / UL / NEMA / IEC applicable for Industrial/Residential products
Excellent teamwork, communication skills an absolute necessity.
Desired
Knowledge on 6 sigma
Exposure to MCCB, ACB, MCB Current Path Design, Arc Chamber Design, Thermal / Heat Rise Calculations, Repulsion Forces Calculations, Mechanism simulation.
Previous experience in mechanism design, Selection of material, Contact tips, Welding & Brazing process knowledge is desired.
Email Resume   Top
Engineer Design Automatic Transfer Switch
COS # 393926
Location: Hyderabad, India
Relo Exp: Yes
Essential Functions (Responsibilities)
Provide design support for Automatic Transfer Switch product line. This involves working on design, development and introduction of new products and improvements to existing products
Execute product cost reduction & quality improvement programs
Support manufacturing plants on quality issues and cost-out projects
Work effectively with global teams
Perform mechanical analysis using tools like Pro/Mechanica, Cetol, ANSYS
Qualifications/ Requirements
Bachelors Degree in mechanical engineering with 2-3 years experience in Switchgear industry
Proficiency in ProE/AutoCAD
Hands on experience in Modeling and Detailing of mechanical components, sheet metal enclosures etc using ProE
Design Experience related to Low Voltage electrical equipment
Strong initiative and ability to work independently
Desired
Green Belt Certified
Exposure to type tests requirements and coordination with Test Labs
Familiarity with software package such as ANSYS
Email Resume   Top
Senior .Design Engineer - Equipment
COS # 394875
Location: Hyderabad, India
Relo Exp: Yes
Essential Functions (Responsibilities)
As Part of Global Equipment Technology team will be working on Growth/VCP programs
Will be responsible for the integrity of the design & documentation to GE / certification standards.
Need to work with Project Leaders to execute the programs utilizing the "A" /"C" change process
Need to liaise with Product Owners for necessary information/reviews
Develop DFSS scorecards to the respective design during the development cycle.
Lead "C" change programs
Qualifications/ Requirements
Electrical/Mechanical Engineering Graduate
2- 4 years Design Experience on Switchboard/Panelboard/PCC/MCC/Busduct product lines
Design and develop Sheetmetal Enclosures, Busbars etc.
Good understanding of Indian and IEC standards related to enclosed equipment products
Exposure to type tests requirements and coordination with Test Labs
Ability to work on ProE or anyother 3D package will be an advantage
Desired
Green Belt Certified
ProE knowledge
Email Resume   Top
Design Engineer - Equipment
COS # 394878 -
Location: Hyderabad, India
Relo Exp: Yes

Essential Functions (Responsibilities)
As Part of Global Equipment Technology team will be working on Product support function
Will be responsible for the integrity of the design & documentation to GE / certification standards.
Need to work alongwith Product Owners for necessary information
Support Product Owner in solving critical Quality issues
Qualifications/ Requirements
Electrical/Mechanical Engineering Graduate
2- 4 years Design Experience on Switchboard/Panelboard/PCC/MCC/Busduct product lines or any Sheetmetal enclosed products
Good Knowledge on ProE or other 3D packages
Desired
Green Belt Certified
Email Resume   Top
Software Engineer - GUI - VC++
COS # 393918
Location: Hyderabad, India
Relo Exp: Yes
Essential Functions (Responsibilities)
· The person shall have VC++ Exposure with awareness of backend database like mySQL / MS Access as core requirement
· Familiarity to Serial communication protocol
· The Candidate shall preferably have an exposure to JSP(Java Servlet Programming) / experience with web enabling applications.
· Provide software upgrades for legacy Total Lighting Controls product line.
· Software development and integration of Total Lighting Controls product and Smart Fixtures.
· Develop and support web interface for Total Lighting Controls and Smart Fixtures.
· Learn and follow the GELS NPI process.
· Integrate fully with the GELS/TLC/ATC/IBC engineering team to produce the World's Best Lighting and Controls package.
Qualifications/ Requirements
B-Tech in Computer Science, Electrical, Electronics or Mechanical Engineering / MCA with more than 2 years of experience in C, Java, VC++ and Web Designing
Demonstrated project management Skills.
Good Team player
Good Communication Skills
Desired
Green Belt Certified
Email Resume   Top
RTS Documentation Engineer
COS # 393916
Location: Hyderabad, India
Relo Exp: Yes
Essential Functions (Responsibilities)
Provide primary documentation support for Total Lighting Controls and secondary documentation support for GELS.
Design and layout support for Total Lighting Controls and GELS.
Become familiar with the GELS and TLC product lines and assist Product Management with customer specification reviews.
Support GELS electrical systems in an RTS role.
Learn and follow the GELS NPI process.
Qualifications/ Requirements
B-tech / Mtech in mechanical engineering / Electrical Engineering with more than 2 years of experience in Pro-E or Autocad and Mechanical Engineering design.
Demonstrated project management Skills.
Understanding of basic electrical concepts.\
Proficiency with Access database.
Strong analytical, computer, and troubleshooting skills.
Good Team player.
Good Communication Skills.
Desired
Green Belt Certified
Working knowledge of "My Workplace".
Email Resume   Top
Mechanical Engineer Lighting Fixtures & Lighting Control Systems
COS # 393917
Location: Hyderabad, India
Relo Exp: Yes
Essential Functions (Responsibilities)
Thermal analysis of lighting fixtures and lighting control systems containing mechanical,
electrical, and electromechanical components and subsystems.
Layout, arrangement, and packaging of lighting and lighting controls systems and components.
Responsible for UL thermal and mechanical certification of new product.
Learn and follow the GELS NPI process.
Integrate fully with the GELS/TLC/ATC/IBC engineering team to produce the World's Best Lighting and Controls package.
Qualifications/ Requirements
B-tech / Mtech in mechanical engineering with more than 2 years of experience in Thermal Evaluation and problem resolution in Mechanical Design.
Exposure to UL or other 3rd party certification
Strong analytical, computer, and troubleshooting skills
Good Team player.
Good Communication Skills.
Desired
Green Belt Certified
Email Resume   Top
Total Lighting Controls and Lighting Systems - Firmware Support Engineer
COS # 393919
Location: Hyderabad, India
Relo Exp: Yes
Essential Functions (Responsibilities)
Design and support of microprocessor based lighting controllers including interfacing to hardwired and wireless networks as well as electromagnetic and electronic ballasts.
Assist in development and support of Total Lighting Controls microprocessor based astronomical clock/controller.
Firmware support in the systems upgrade of legacy Total Lighting Controls product.
Learn and follow the GELS NPI process.
Integrate fully with the GELS/TLC/ATC/IBC engineering team to produce the World's Best Lighting and Controls package.
Qualifications/ Requirements
B-tech / M-tech in Electrical /Electronics/Communication engineering with 0-3 years of experience.
The candidate must be proficient in using IDEs for micro controllers and proficient in C and ALP of at least one micro controller
Awareness/experience of Micro-controller firmware, communication protocols both wireless and wired communication.
Good Team player.
Desired
Green Belt Certified
Experience in the following
· Firmware development
· Demonstrated project management skills
Email Resume  Top
Circuit Breaker Design Engineer [Mechanical]
Job Code: 382024
Essential Functions/Responsibilities:
Experience in Low Voltage Breakers Mechanism Design preferably Stored Energy systems used in Air circuit breakers or MCCB mechanisms or their Accessories
Job involves Design of Mechanism parts / Linkages to meet functional requirement of the Breaker.
Innovative ideas for part count reduction,Simplification and robust mechanism Design is essential.
Strong Materials,heat treatment and Process knowledge is required to achieve Reliable Designs.
Must be able to develop mathematical Models for optimizing the Link Geometry,Forces & Linkage Movements.
Qualification/Requirement
Position : Mechanical Design Engineer
Qualification : B.Tech / B.E / M.Tech [Mechanical]
Experience : 5 to 8 years
The person should have had exposure to ACB / Mccb Accessories Design,Mechanical Design,Transfer Functions,Optminsation of Forces,Linkage Movements
Desired:
Pro-Engineer, Pro-Mechanica, Motion Simulation
Matlab
Email Resume   Top
Circuit Breaker Design Engineer [Electrical]
Job Code : [382033]
Essential Functions/Responsibilities:

The person would work in Air circuit Breaker & MCCB Current path design.
He would be required to calculate constriction forces, Contact Blow open thresholds, Mathematical modeling of Contact Depression, Contact Forces.
Exposure to Arc Runner, Arc Chamber design with knowledge of Short circuit behavior of contact system and venting of arc products will be an added advantage.
Must be able to develop Mathematical models of contact forces and blow open forces calculations.
Qualification/Requirement
Position : Electrical Design Engineer
Qualification : B.Tech / B.E [Electrical]
Experience : 4 to 5 years
Desired:
The person should have had exposure to Acb / Mccb Current Path Design, Current Path Design,Arc Chamber Design,Thermal / Heat Rise Calculations,Repulsion Forces Calculations Previous experience in Contact system design, Selection of material, Contact tips, Welding & Brazing process knowledge is desired
Pro-Engineer,Matlab,Ansys
Email Resume   Top
CAE Analytical Engineer
Job Code : [382047]
Essential Functions/Responsibilities: 1 Position
The person would be required to develop Thermal Model of Breakers and Switch gear For Heat rise optimization. He would be a part of the Core Design Team to understand Design Requirements Translate into a Analysis problem and optimize the Design Solution He would develop Electro magnetic Models of Circuit Breaker Contact Systems to Optimize Blow Open forces and Current withstand capacity.
Develop Arc Chamber venting Model using CFD tools to Optimize the emission of Arc products and deionization.
Qualification/Requirement
Position : CAE Analytical Engineer
Qualification : B.Tech / B.E / M.Tech [Mechanical]
Experience : 8 to 10 years
Desired:
Electro Thermal Analysis
Electro Magnetic Analysis
CFD Analysis Pro Engineer,Ansys, Magnet, Fluent.
Email Resume   Top
Tool Engineer (Gauges/ Fixtures)
Job COS : 390540
Location: Hyderabad, India
Relo Exp:
Essential Functions (Responsibilities)
Providing End solutions to the internal customer tooling needs, to improve Quality and productivity.
Design, development and prototyping of Gages, Assembly Fixtures and Welding fixtures.
Responsibility includes the tryout and proving of the tooling, and conducting Gage R&R.
Gage design to check part level and Assembly level Critical to Quality characteristics.
Assembly fixture design for the part assembly lines.
Welding fixture design for brazing parts.
Qualifications/ Requirements
PDTD or PGTD from CITD or similar with 4+ years of experience
Working knowledge on Pro-E
Knowledge of quality tools like process and design FMEA, Six sigma added advantage.
Excellent communication skills : Ability to Express Ideas / Views to the cross functional and Cross cultural teams very critical.
Desired
Design exposure in Automation techniques using Pneumatics is highly desirable. Exposure to the selection and use of sensors will be a great advantage.
Email Resume   Top
Mechanical Designer - Meters
Job COS = 390550
Qualification: B.E/B.Tech. in Mechanical
Experience: Min 2 years experience in design projects from concept to manufacture.
Tasks:
Concepts generation,
Designing of Plastic Injection molded parts & sheet metal parts, (DFM/DFA)
Geometric tolerance & dimensioning,
Understanding international product standards like IEC, ANSI etc
And making of test plans and procedures.
Drawing Changes - Image Files editing
Skills:
Product Design & Manufacturing
ProE-
3D modeling,
Sheet Metal,
Cabling,
Detailing/drafting
Tolerance analysis (using CeTol)
Excel,
Power point,
Good communication skills - written and verbal.
AutoCAD
Image Editing Software
Experience in Meter product line is added advantage.
Email Resume   Top
S/W test Automation :
2 -4 years of experience in test automation tool like Rational
Visual test / Rational Robot / Mercury Quick TestPro
Strong experience in VB , VBA script development
Aptitude for s/w testing
Clear understanding of test life cycle , flexible and problem
solving attitude
Preferably in industrial automation domain - HMI / SCADA / PLC / DCS
Email Resume   Top
S/w VC++ - SCADA:
3+ year strong exp in C, C+ and VC++ ,
PLC/ SCADA/ HMI / industrial automation domain would be preferred
Strong trouble shooting skill and mindset
Flexibility and quick learning ability
Good in communication written and verbal.
Email Resume   Top
Electrical Design Engineer - Substation
· 4-7 years of experience in EBoP /Substation Design Engineering.
· Qualification: Bachelors/ Masters Degree in Electrical Engineering.
· Excellent knowledge of electrical power utility systems and substations.
· Good PC skills with knowledge of MS Office, AutoCAD and Access database
· Experience on engineering software tools viz. ETAP, CYME etc. will be an advantage.
· Experience in Project Management tools preferred. (Microsoft Project, Primavera etc.)
Experience of international projects with knowledge of international codes and standards.

Candidate will be responsible for Electrical Engineering for automation of substations.
Qualificaton: BE/B Tech - Electrical.

Exp : 3-7 years with in-depth knowledge of Substation Engineering including Protection & Controls design, Relays Interlocking/Settings, Earthing Schemes, Lighting calculations.
Usage of engineering tools like ETAP and Installation & Commissioning experience will be an added advantage.
Email Resume   Top
Automation Engineer - Delta V
· Bachelors / Masters degree in Instrumentation / Electrical Engineering with 2-6 years of experience.
· Engineering &/Or commissioning Experience of Distributed Control Systems
· Computer literate with knowledge on the use of Access Database, MS Office & AutoCAD
Experience in Engineering of Fisher Rosemount' Delta - DCS and familiarity with Instrument Loop Sheets, design and function will be an added advantage.

Candidate will be responsible for application software development for Power Plant/Oil & Gas Automation.

Qualification: BE / B Tech / Diploma in Instrumentation, Electrical, Electronics.

Experience: 2-5 years with in-depth knowledge on PLC/SCADA/DCS Engineering/Installation/Commissioning.
Experience in Power/Oil & Gas/Petrochemical/Wind projects preferred.
Email Resume  Top
SCADA Software Database Engineer :

Essential Functions (Responsibilities):

A SCADA Software Database Engineer responsible for the database analysis, database design, database access, optimization and maintenance. Software engineer works closely with SCADA development team and control system design engineers to ensure the product design will be competitive and meet product specifications. Selected individual will be required to make technical presentations to peers and managers on the details of the design and project implementation status.

Qualifications/Requirements:
BE / BTech Computer Science, Computer Engineering, Electrical, Automation Engineering (or similar field) with particular emphasis on real time data acquisition and database design with 3 to 5 years of exp

· Excellent knowledge of database design and configuration
· Proficient in MS SQL, Stored Proc, optimization and maintenance
· Knowledge in C/C++ or Delphi, VB, and SQL is a plus
· MCDBA is advantage
· Knowledge of SCADA system and real time control design and implementation
· Understanding of SCADA protocols and their use and application
· Experience with Network protocols (TCP/IP, SNMP, FTP, SNTP, Email, ODBC)
· Operating System proficiency, Windows 2000 Server, Linux, Unix
· Experience with monitoring, control and automation hardware and software
· Team player with strong communication skills
· Strong English skills (verbal and written), other languages are advantage
· Ambitious, smart worker; self-starter, who delivers results with minimal supervision
· Meets or beats schedule and quality targets
· Analytical thinker

Desired:
· Understanding of electric utility transmission and distribution systems
· Ability to work in a global team environment to integrate solutions
· Knowledge of industrial controls and monitoring systems
· Oracle, MS SQL, and ODBC experience
Email Resume   Top
Software Engineer (ASP) (DATAMINING)
· Good web and application development skills using ASP, Visual Basic, Oracle, SQL Server technology with 2-4 years of exp.
· Assisting individuals and teams with data mining and analysis requests.
· Should be a proactively interacting with various individuals/teams.
· Documenting the knowledge and requirements.
· Good presentation, communication skills.

Experience: MCA with preferably Engineering graduate with 3+ Years in mentioned technology above.
Email Resume   Top
Electrical/Electronics Engineer (Reliability Engineer)
· Electrical engineer with knowledge Controls experience.
· Preferably with experience of Reliability Analysis techniques.
· Should be able to root cause analysis and provide a solution.
· Assisting individuals and teams with data mining and analysis requests.
· Should be a proactively interacting with various individuals/teams.
· Documenting the knowledge and requirements.
· Good presentation, communication skills.

Experience: BE Electrical Engineering graduate with 3+ Years. A candidate with less experience or fresher can be considered if the candidate can demonstrate the knowledge of above mentioned requirements.
Email Resume   Top
Systems Engineer: Reliablity Block Diagram

Essential Functions (Responsibilities)
· Work with product development teams to develop reliability block diagrams for Turbine Control systems.
· Study the system and electronic boards to identify various sections to translate physical systems to reliability block diagram.
· Calculate Bellcore numbers for electronic boards.
· Analyze results to identify weak links in the system.
· Work with other teams to get system details. Translate IO listing to system configuration.
· Identify ways to automate the process as and when desirable.
· Documentation for all the system studies.

Qualifications/ Requirements
· B.E./B.Tech. (Electrical/Electronics) with minimum 5yrs. Experience.
· Minimum two years hands on experience of reliability engg.
· Knowledge of Bellcore & simulation software like BlockSim.
· Hands on experience/Ability to understand electronics designs

Desired
· Working experience of power system/Processes.
· GB certified
· Good verbal and written communication.
· Strong team player & resourceful.
· Excellent analytical problem solving skills
Email Resume   Top
Firmware / Embedded Systems Engineer

Responsibilities:
Join the technology team and utilize your software skills to develop real-time embedded software used in our next generation turbine control products:
The individual is expected to work in a dynamic environment where they will be resposible for defining their software deliverables, tasking their work and meeting their schedules.
Technical responsibilities include:
Software definition, design, implementation and testing.

Qualification/Requirements:
- Graduate / Post Graduate in Engineering in Electronics and/or Instrumentation
- 1-3 years in real time embedded software development using structured / object oriented software design
- Demonstrated experience with C/C++ programming in a real time embedded environment. Knowledge of assembly language programming a plus.
- Experience with any Real time operating system . Preferably QNX 4 / QNX 6
- Experience with Intel x86 microprocessors
- Excellent written and verbal communication skills.
- Strong problem solving skills
-Experience working in a team environment and self-starter with a high level of energy and intiative
Desired:
- Experience with QNX OS will be a plus.
- Multi threaded programming experience.
- Knowledge of PLC and DCS a plus.

Email Resume   Top

Job Title Manager - Tendering
Location Pallavaram-Chennai
Reporting to Manager - Tendering

Level Middle Management
Qualification: Required BE - Electrical & Electronics
Experience: Required 8-10 Years in tendering function

Languages Preffered: English, Hindi
Job Responsibilities ->Receive customer queries, finalize components and rates, determine and analyze costs,
->monitor competitor prices set tender prices,
->get approval for price, prepare and submit tender documents,
->participate in post-tender negotiation,
->analyze information pertaining to order inputs, sales figures, collection figures, tender opening results
->circulate MIS reports to aid performance monitoring and decision making,
->analyze future strategic tenders, estimate cost resources required, provide inputs to prepare annual budgets,
->receive order, acknowledge order in SAP, handover order to project management, provide inputs during order processing to ensure proper implementation of orders received.
Competencies Technical: Commercial terms of contracting, legal requistes in tendering, customer responsiveness, Knowledge of Relay & Control Panels

Behavioural : Time management, planning, Negotiation Skills, Networking skills.
Other Information Good PC Skills
Email Resume   Top

Job Title Assistant Manager - Service
Location Pallavaram-Chennai, Mumbai
Reporting to Manager- Service
Level Middle Management
Qualification: Required BE - Electrical & Electronics
Experience: Required 3- 4 years experience in testing and service in Electrical industry
Languages Preffered English, Hindi
Job Responsibilities ->Analyse customer complaints,
->offer proposal for repair or modification, negotiate and finalise service,
->ensure proper invoicing and payment,
->rectify complaint, monitor relay performance, co-ordinate relay testing to ensure customer satisfaction and enhanced revenue through customer service,
->prepare quotation against enquiry, negotiate and finalize with customer, acquire order,
->ensure proper contract execution, initiate invoicing and follow-up for payment to ensure customer satisfaction and revenue through customer service,
->supervise and monitor sale of spares against enquires, contribute to development of spares price list, follow-up to service orders,
->report periodically on sales achieve spares sales targets, respond to customer queries,
->co-ordinate with overseas offices for technical assistance, provide technical and customer support to regions on technical issues, train staff, customers and franchisees in relevant areas to improve quality of service delivery.

Competencies Technical: Product knowledge, commercial knowledge, good understanding of company's business and products, Customer responsiveness.

Behavioural: Communication skill, negotiation skill, Interpersonal skill.
Other Information PC Skills
Email Resume   Top

Job Title Engineer - Engineering, Control Panel
Location Pallavaram-Chennai
Reporting to Manager Engineering
Level Middle Management
Qualification: Required BE (Electrical & Electronics)
Experience: Required 3-4 years in similar function
Languages Preffered English, Hindi
Job Responsibilities
->Prepare technical drawings based on customer order, seek approval from customer and incorporate modifications,
->seek amendment of order based on deviation list, prepare cutout drawings and
->provide details to ensure that technical specifications and customer requirements match and to enable customer order fulfillment.
->Prepare final drawings incorporating customer requirements and shop amendments.
->Prepare material requisition and shop documents for fabrication,
->provide support documentation to settle outstanding claims to ensure timely completion of projects and recover all outstandings.

Competencies Technical: Good understanding of Protection concepts; Engineering drawing using CAD/CAM, ->Knowledge of manufacturing process
Managerial: Planning; Analytical Skills, People Management Skill, Process management."
Other Information Proficient in CAD, Excellent PC skills
Email Resume   Top

Job Title Manager - Sales Support
Location Pallavaram-Chennai
Reporting to Senior Manager - Sales Support
Level Middle Management
Qualification: Required BE - Electrical & Electronics
Experience: Required 8-10 Years experience in protection equipment business and field exposure
Languages Preffered English, Hindi
Job Responsibilities ->Analyze customer needs, identify appropriate solutions,
->influence customer to include company products specs in tenders,
->respond to technical queries of customers,
->participate in tender evaluation process,
->interact with customers/OEMs, organize product presentations/ roadshows to ensure technical shortlisting of Company's bid,
->identify and evaluate suitable products from Company's range -study market applications, seek approval for new products,
->report to management to benchmark with market,
->provide technical support to sales team, conduct training for sales staff on product range and capabilities, present product credentials to customers, participate in training programmes,
->provide tech support in case of unique, major problems with applications / products, consult with customers on understandings their needs and issues and providing optimum solutions,
->assist in scheme drawing and setting calculations for products, interact with customers for confirming drawing to ensure proper utilization of products,
->represent company in industry for national committees to project the desired image of the Company .

Competencies ->Technical: Indepth knowledge of protection and power systems, good understandings of company's business and markets.
Behavioural :Presentation skill and communication skill, Interpersonal skills, networking skills .
Other Information PC Skills
Email Resume   Top

Job Title Executive / Assistant Manager - Manufacturing & Product Support Engineer
Location Pallavaram-Chennai
Reporting to Manager - Production
Qualification: Required BE - Electrical and Electronics
Experience: Required Minimum 3 years of Experience in Manufacturing and Managing people
Industry/ Company Preference Industries with good manufacturing practices / similar electrical / electronic industries. Experience in Relay manufacturing would be preffered.
Languages Preffered English, Tamil
Job Responsibilities "Production planning and control Materials managment
Technical assistance to routine manufacturing
Trouble shooting of defective electronic boards
Maintenance of Testing equipment and trouble shooting
Development of Test softwares
Maintenance of product firmware
Maintenance of quality indicators and other production charts
Implement quality systems and procedures, ISO 9000 /14000
Report periodically on performance against targets
Resolve regular and escalated production issues,
Periodically, update production status in SAP"
Competencies Technical
Power system protection and control
Power system equipment and elements
Analog / Digital electronics
Microprocessor based electronic cricuits
Digital Signal Processor
ISO 9000/ 14000 working knowledge
Behavioural / Managerial
Planning
People management
Communication
Other Information PC Skills, Preferred - Knowledge of SAP, QC and other analysis tools, Instrumentation and measurement techniques, Awareness on TQM & TPM.
Email Resume   Top